C35R / 1.1180 Special Steel
C35R / 1.1180 Special Steel Description
Non alloy special structural steels: Structural steels with average C < 0,50%.
C35R / 1.1180 Special Steel Chemical Composition per EN 10083-2 (Special Steel)
GRADE | NUMBER | C | Si | Mn | P | S | Cr | Mo | Ni | Cr+Mo+Ni |
C35R | 1.1180 | 0.32-0.39 | ≤ 0.40 | 0.50-0.80 | ≤ 0.030 | 0.02-0.04 | ≤ 0.40 | ≤ 0.10 | ≤ 0.40 | ≤ 0.63 |
C35R / 1.1180 Special Steel Applications
Steels for quenching and tempering, auto and motor construction parts.
C35R / 1.1180 Special Steel Physical properties (average values)
at ambient temperature
Modulus of elasticity [103 x N/mm2]: 210
Density [g/cm3]: 7.86
C35R / 1.1180 Special Steel Soft Annealing
Heat to 650-700oC, cool slowly in furnace. This will produce a maximum Brinell hardness of 183.
C35R / 1.1180 Special Steel Normalizing
Normalizing temperature: 860-900oC.
C35R / 1.1180 Special Steel Hardening
Harden from a temperature of 840-880oC, 840-880oC followed by water or oil quenching.
C35R / 1.1180 Special Steel Tempering
Tempering from the quenched condition may be done at 550-660oC depending upon the strength desired.
C35R / 1.1180 Special Steel Forging
Hot forming temperature: 1100-850oC.
C35R / 1.1180 Special Steel Machinability
Machinability is good, rated at 60% that of the AISI 1112 alloy used as a 100% machining rated steel.
C35R / 1.1180 Special Steel Corrosion Resistance
This is a steel alloy and will rust if not protected. it is not corrosion resistant.
C35R / 1.1180 Special Steel Welding
C35R / 1.1180 Special Steel is weldable by all of the welding methods. However with its higher carbon content it is important to use both pre- heat at 150 to 260oC and post-heat at 590 to 650oC practice per an approved welding procedure.
C35R / 1.1180 Special Steel Cold working
In the annealed state the C35R / 1.1180 Special Steel alloy is readily cold worked by conventional methods.
Page Contents
- C35R / 1.1180 Special Steel Description
- C35R / 1.1180 Special Steel Chemical Composition per EN 10083-2 (Special Steel)
- C35R / 1.1180 Special Steel Applications
- C35R / 1.1180 Special Steel Physical properties (average values)
- at ambient temperature
- C35R / 1.1180 Special Steel Soft Annealing
- C35R / 1.1180 Special Steel Normalizing
- C35R / 1.1180 Special Steel Hardening
- C35R / 1.1180 Special Steel Tempering
- C35R / 1.1180 Special Steel Forging
- C35R / 1.1180 Special Steel Machinability
- C35R / 1.1180 Special Steel Corrosion Resistance
- C35R / 1.1180 Special Steel Welding
- C35R / 1.1180 Special Steel Cold working