C35E / 1.1181 Special Steel
C35E / 1.1181 Special Steel is a medium carbon, medium tensile steel supplied as-forged or normalized condition.This steel shows excellent forgeability, reasonable strength, toughness and wear resistance. C35E / 1.1181 Special Steel is easily welded with the correct procedure.Due to the carbon content preheating and postheating are required.It has good Machinability after full annealing.Wide range of mechanical properties can be attained by quenching and tempering,as quenched hardness should be approximately 45 HRC
C35E / 1.1181 Special Steel Supply Form & Size
Form of Supply | Size(mm) | Length(mm) |
Round bar | Φ6-Φ1000 | 3000-10000 |
Square bar | 100 x 100-600×600 | 3000-6000 |
Flat bar/Blcoks | Thickness :120-800 | 2000-6000 |
Width:120-1500 |
C35E / 1.1181 Special Steel Surface Finish&Tolerance
Surface Finish | Black-Forged | Black-Rolled | Turned | Grinding | Polished | Peeled | Cold Drawn |
Tolerance | (0,+5mm) | (0,+1mm) | (0,+3mm) | Best h9 | Best h11 | Best H11 | Best H11 |
C35E / 1.1181 Special Steel Chemical Composition per EN 10083-2 (Special Steel)
GRADE | NUMBER | C | Si | Mn | P | S | Cr | Mo | Ni | Cr+Mo+Ni |
C35E | 1.1181 | 0.32-0.39 | ≤ 0.40 | 0.50-0.80 | ≤ 0.030 | ≤ 0.035 | ≤ 0.40 | ≤ 0.10 | ≤ 0.40 | ≤ 0.63 |
USA | UK | China | Japan |
1035 | 080M36 | 35# | S35C |
C35E / 1.1181 Special Steel Mechanical Property
Diameter d mm | ≤ 16 | 16-40 | 40-100 |
Thickness t mm | < 8 | 8-20 | 20-60 |
Yield Strength Mpa | ≥430 | ≥380 | ≥320 |
Tensile Strength Mpa | 630-780 | 600-750 | 550-700 |
Elongation, % | ≥17 | ≥19 | ≥20 |
Reduction of area ,% | ≥40 | ≥45 | ≥50 |
C35E / 1.1181 Special Steel Forging
Forging temperature:950-1200℃,air cooling after forging.
C35E / 1.1181 Special Steel Annealing
Full annealing is carried out from 840-890ºC, followed by furnace cooling at 28ºC per hour, to 650ºC soaking and air cooling.
C35E / 1.1181 Special Steel Normalizing
The normalizing temperature range for this grade is typically 860-900ºC,followed by cooling in still air.
C35E / 1.1181 Special Steel Hardening
Hardening of C35 steel is carried out from an austenitizing temperature of 830-860ºC,followed by oil or water quenching.
C35E / 1.1181 Special Steel Tempering
Tempering after normal hardening and oil or water quenching is carried out at 550-680ºC to give the required mechanical properties as determined by practical experience.
C35E / 1.1181 Special Steel Application
C35 steel is one of the most widely used for machinery parts,and used for forged parts where the strength and toughness of the material are appropriate.The following are the major applications of C35 carbon steel:
- Levers
- Bolts
- Nuts
- Studs
- Gears
- Forged shafts
- Axles
Page Contents
- C35E / 1.1181 Special Steel Supply Form & Size
- C35E / 1.1181 Special Steel Chemical Composition per EN 10083-2 (Special Steel)
- C35E / 1.1181 Special Steel Mechanical Property
- C35E / 1.1181 Special Steel Forging
- C35E / 1.1181 Special Steel Annealing
- C35E / 1.1181 Special Steel Normalizing
- C35E / 1.1181 Special Steel Hardening
- C35E / 1.1181 Special Steel Tempering
- C35E / 1.1181 Special Steel Application