AISI 4330 / 4330V Steel
WALDUN is one of the best AISI 4330 / 4330V Steel manufacturers and suppliers in China, you can get ound rods,square/flat bars,rollers,shafts,blocks and forging pieces with competitive price.
AISI 4330 / 4330V Steel is a general nickel-molybdenum alloy steel as per American standard which has high strength,toughness and excellent hardenability. AISI 4330 / 4330V Steel is usually supplied under quenched and tempered condition at the hardness of 24 – 29HRc.
Typical applications are for structural use, such as aircraft landing gear, power transmission gears and shafts and other structural parts.
AISI 4330 / 4330V Steel Chemical Composition
GRADE | C | Si | Mn | P | S | Cr | Mo | Ni | V |
4330 | 0.30-0.34 | 0.15-0.35 | 0.75-1.00 | ≤ 0.035 | ≤ 0.035 | 0.75-1.00 | 0.40-0.50 | 1.65-2.00 | 0.05-0.10 |
AISI 4330 / 4330V Steel SIZE & TOLERANCE & PROCESS
Shape | Size(mm) | Process | Tolerance | Length(mm) |
Round | Φ6-Φ50 | Cold Drawn | H11 | 3000-5800 |
Round | Φ40-Φ300 | Hot Rolled | -0/+3mm | 3000-10000 |
Round | Φ120-Φ1000 | Hot Forged | -0/+3mm | 3000-10000 |
Flat/Square/Block | Thickness:120-800 Width:120-1500 | Hot Forged | -0/+3mm | 500-6000 |
AISI 4330 / 4330V Steel HEAT TREATMENT
Normalizing For AISI 4330 / 4330V Steel
1.Nominal normalizing temperature:840-900°C
2.Hold the temperature for several hours
3.Cooling in the air
Annealing For AISI 4330 / 4330V Steel
1.Nominal Annealing temperature:800-860°C
2.Cool slowly in the furance
3.Maximum Brinell hardness of 270
Hardening and Tempering(QT) For AISI 4330 / 4330V Steel
1.Nominal Hardening temperature:830-865°C
2.Hold at this temperature then quench in oil
3.Tempering as soon as possible when the temperature low to ambient temperature
4.Heat the steel carefully to a suitable temperature selected by reference to a tempering chart or table
5.The usual tempering temperature is 600°C which depending on the actual requirements
6..keep the material out of the furnace ,then cool in the air
AISI 4330 / 4330V Steel Mechanical Property( for reference only)
1.Tensile strength: 1020MPa
2.Yield point: 945MPa
3.Percentage reduction of area after fracture: 55%
4.Elongation after fracture: 13%
5.Impact test (+20°C): Transverse – 27~32J; Longitud – 45~50J
AISI 4330 / 4330V Steel DELIVERY CONDITION
1.Shape:Round/Square / Flat/Shafts/Rollers/Blocks
2.Surface condition:Black surface/Bright surface
3.Heat Treatment:Normalized/Annealed/QT
4.Straightness:Max 3mm/m(Enhanced straightness may be available on request)
5.Length:3000-5800mm suitable for 20″container. above 6000mm,suitable for 40″ container
6.Grain Size: 5-8 acc to ASTM E112-96
7.Typcial Hardness:HRC28-32
8.Ultrasonic Standard: Sep1921/ASTM A388/EN 10228-3
9.Non Metallic Inclusion: 2 max acc to ASTM E45 /K4≤20 acc to DIN 50602
10.Forging Ratio: minimum 4 : 1
11.Marking: Grade/Weight/Length/Size/Heat Number
AISI 4330 / 4330V Steel QUALITY CERTIFICATION
A material test report(Inspection Certificate EN 10204 3.1) will be provided, documenting the following:
1.Chemical analysis
2.Mechanical properties
3.Surface hardness
4.Non Metallic Inclusion
5.Heat Treatment Process
6.Grain size
7.Forging ratio
8.NDE test method/criteria