1.2714 Steel – The Ultimate FAQ Guide

Are you looking to uncover the truth behind what 1.2714 steel is? Do you want to learn more about this particular kind of steel to properly figure more out about it?

In this guide, we’ll help you have a better and a deeper understanding of what the 1.2714 steel is. We will help you see it at a better angle to the extent that you’ll know every inch and bit of it!

What is DIN 1.2714 Steel?

It’s a type of steel that you can use for hot working tool sets, specifically in the plastic mold industry.

Image of how the DIN 1.2714 steel looks like

Thanks to its large amounts of Chromium and Nickel, you can expect it to have high levels of toughness and hardening properties.

You can find DIN 1.2714 as a 40 HRC standard grade that possesses uniform hardness plus good hardenability.

DIN 1.2714 Equivalent Steel

DIN is a European standard and is the abbreviation of Deutsches Institut für Normung, in English, it is the German Institute of Standardization.

Since the DIN 1.2714 is under this particular standard, there are other standards that have this particular steel. While they’re similar in terms of what elements are present, they’re different in terms of the content levels.

The equivalent steels for DIN 1.2714 are:

• AFNOR 55 NCD V7
• Euronorm 55 NiCrMo V7
• DB6
• AISI L6 Steel

What are the Characteristics of 1.2714 Steel?

Annealed state is extremely workable and efficient

Some of the most notable traits and specific characteristics of DIN 1.2714 steel include:

• High hardness levels after hardening process
• Good levels of tempering resistance
• Resistant in sudden temperature changes
• Thermal fatigue adaptability
• Can be hardened in both oil (830 to 870 degrees Celsius) and air (870 to 900 degrees Celsius)
• Workable even while its softly annealed

What is the 55NiCrMoV7 Steel?

This particular steel grade is similar to the DIN 1.2714, it’s just the new term for it because it follows the Euronorm format, not the DIN.

Quick sample of the 55NiCrMoV7 steel

The Euronorm standard is a standard that replaced the DIN, along with some other standards in the industry, such as BS, NF, and SS.

DIN 1.2714 Mechanical Properties

The mechanical properties of DIN 1.2714 steel are important because these are what you’ll be using them for.

You ought to know these information for you to distinguish whether or not you’ll be able to use them for the application you want. The mechanical properties of DIN 1.2714 steel includes:

• (HB) Hardness: 376
• Rm Tensile Strength:MPa 1270; ksi 184
• Rp 0.2 Yield Strength: MPa 1045; ksi 151
• Elongation: 10%
• Elastic Modulus:GPa 205; ksi 29733

For Which Applications Can You Use DIN 1.2714 Steel?

You can find use of the DIN 1.2714 steel in a wide array of sectors and industries.

Forming dies – one of the most customary applications you can have for 1.2714 steel

The most common applications you can have for this particular steel grade include:

• Clutch Parts & Pins
• Punches
• Forming Rolls
• Spindles
• Bearings
• Chuck Parts
• Knuckle Pins
• Pawls
• Trimmer Dies
• Blanking and Forming Dies
• Hot Punching Tools and Shear Knives

These aren’t the only applications you can have with DIN 1.2714 steel; there are a lot more!

What’s the Dimensional Program You Can Get 1.2714 Steel For?

The usual thickness that you can purchase it for is between the range of 8 and 120 mm. For the width, it’s in the range of 1,000 to 2,100 mm.

NOTE: You can get custom DIN 1.2714 steel if you want thicknesses and width that’s higher or above the usual. You just need to tell your manufacturer about it.

DIN 1.2714 Steel Chemical Composition

For you to have a better understanding of what 1.2714 steel is, here is its chemical composition:

Nickel (Ni)	Chromium (Cr)	Molybdenum (Mo)	Silicon (Si)	Phosphorus (P)	Sulfur (S)	Manganese (Mn)	Carbon (C)
1.50 to 1.80%	1.00 to 1.20%	0.45 to 0.55%	0.10 to 0.40%	≤ 0.030%	≤0.030%	0.65 to 0.95%	0.50 to 0.60%

How is DIN 1.2714 Made and Manufactured?

Generally, alloyed steel is made through the mixture or the combination of plain carbon steel with alloying elements.

The creation and the manufacturing of DIN 1.2714 steel is like this, and employs the melting of carbon steel along with other alloying elements to form a better and a more specific material.

You can manufacture DIN 1.2714 through the melting all of the alloying elements mentioned above in either a casting operation or a furnace. It’s done in a closed and a controlled area to refrain from oxidation and contamination of the steel.

Can You use 1.2714 Steel in Hot Work Applications?

You can use DIN 1.2714 in hot work applications successfully

Yes, as a matter of fact, DIN 1.2714 steel is specifically made for use in hot working applications because of the toughness and the ductility that it offers.

Where Can You Purchase High Quality 1.2714 Steel?

Wherever you look and whatever type of manufacturing company you work with, you’ll never be able to find a DIN 1.2714 steel manufacturer as adept and as skilled as us at Waldun Steel.

We’re the best and the most experienced alloyed steel manufacturer and you can count and bank on us to help you in producing 1.2714 steels.

Whether you need round steel bars, flat steel bars, or plates, we got you! DIN 1.2714 is just one of the many alloyed steels we have in our arsenal, we offer a lot more!

Don’t hesitate to give us a call here at Waldun Steel if you need further help with 1.2714 steel! We can specify and customize your orders based on size, dimensions, supply forms and shapes – and even composition

Contact us today by shooting us a email or by dialing our hotline! We will grant you a free quotation or a free estimate to help you out with budgeting!

Does Waldun Steel Offer a Free Sample?

So long as you know what you want specifically, we can help you out by giving you a free sample product, too!

Work with Waldun Steel and get world-class quality DIN 1.2714 steel in the best rates and prices!