35NiCr6 \/ 1.5815 Steel<\/b><\/strong><\/h1>\n![\"35NiCr6](\"https:\/\/waldunsteel.com\/wp-content\/uploads\/2021\/08\/35NiCr6-1.5815-Steel-495x400.png\")
<\/p>\n
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Description<\/b><\/strong><\/h2>\nAlloy special steel 35NiCr6 grade steel belongs to alloy steels for quenching and tempering. The material no. is 1.5815.<\/p>\n
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Application<\/b><\/strong><\/h2>\nSteel for heat improvement characterized by high strength properties, good ductility, resistance to fatigue and impact. Used for heavy-duty parts of engines, devices and machines, used in the production of crankshafts, gears, shafts, piston rods, bolts, heat-treated gears and piston rods.<\/p>\n
\n- Crankshafts.
\n\u2022 Shafts.
\n\u2022 Various gears.
\n\u2022 Fasteners etc<\/li>\n<\/ul>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>All Grades Comparison<\/b><\/strong><\/h2>\n\n\n\nDIN<\/b><\/strong><\/td>\nEN<\/b><\/strong><\/td>\nANFOR<\/b><\/strong><\/td>\nAECMA<\/b><\/strong><\/td>\n<\/tr>\n\n1.5815<\/td>\n 35NiCr6<\/td>\n 35NC6<\/td>\n FE-PL62<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Quality Standard<\/b><\/strong><\/h2>\nEN 10083 Steels for quenching and tempering. Technical delivery conditions for alloy steels
\nEN 10250 Open steel die forgings for general engineering purposes. Alloy special steels<\/p>\n
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Chemical Composition per EN 10083-3<\/b><\/strong><\/h2>\n\n\n\nGRADE<\/b><\/strong><\/td>\nNUMBER<\/b><\/strong><\/td>\nC<\/b><\/strong><\/td>\nSi<\/b><\/strong><\/td>\nMn<\/b><\/strong><\/td>\nP<\/b><\/strong><\/td>\nS<\/b><\/strong><\/td>\nCr<\/b><\/strong><\/td>\nNi<\/b><\/strong><\/td>\n<\/tr>\n\n35NiCr6<\/b><\/strong><\/td>\n1.5815 <\/b><\/strong><\/td>\n0.30-0.37<\/td>\n \u2264 0.40<\/td>\n 0.60-0.90<\/td>\n \u2264 0.025<\/td>\n \u2264 0.025<\/td>\n 0.80-1.10<\/td>\n 1.20-1.60<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mechanical Properties(T=20\u00b0C if not differently stated)<\/b><\/strong><\/h2>\n\n\n\nProcess<\/b><\/strong><\/td>\nDiameter(mm)<\/b><\/strong><\/td>\nTensile Strength Rm (Mpa)<\/b><\/strong><\/td>\nYield Strength Rp0.2 (Mpa)<\/b><\/strong><\/td>\nElongation A5 (%)<\/b><\/strong><\/td>\nArea Reduction Ratio C (%)<\/b><\/strong><\/td>\nImpact Value Kv (J) Room Temperature<\/b><\/strong><\/td>\nHardness (HB)<\/b><\/strong><\/td>\n<\/tr>\n\nSOFT ANNEALED<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n 223 max<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 16 max<\/td>\n 880-1080<\/td>\n 740 min<\/td>\n 12 min<\/td>\n 40 min<\/td>\n \/<\/td>\n 261-318<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 16-40<\/td>\n 880-1080<\/td>\n 740 min<\/td>\n 12 min<\/td>\n 40 min<\/td>\n 35 min<\/td>\n 261-318<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 40-100<\/td>\n 780-980<\/td>\n 640 min<\/td>\n 15 min<\/td>\n 40 min<\/td>\n 35 min<\/td>\n 231-289<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>HEAT TREATMENT:<\/b><\/strong><\/h2>\n\n\n\nProcess<\/b><\/strong><\/td>\nTEMPERATURE \u00b0C<\/b><\/strong><\/td>\nCooling Medium<\/b><\/strong><\/td>\n<\/tr>\n\nHot plastic deformation<\/td>\n 850-1100<\/td>\n \/<\/td>\n<\/tr>\n \nNormalization<\/td>\n 850-880<\/td>\n air<\/td>\n<\/tr>\n \nSoft annealing<\/td>\n 640-690<\/td>\n air<\/td>\n<\/tr>\n \nHardening<\/td>\n 840-860<\/td>\n oil<\/td>\n<\/tr>\n \nTempering<\/td>\n 530-630<\/td>\n air<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mill\u2032s test certificate:<\/b><\/strong><\/h2>\nEN 10204\/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.<\/p>\n<\/div><\/section><\/div>
\n<\/div><\/section>
\nLatest Products<\/h3>
<\/p>\nAlloy special steel 35NiCr6 grade steel belongs to alloy steels for quenching and tempering. The material no. is 1.5815.<\/p>\n
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Application<\/b><\/strong><\/h2>\nSteel for heat improvement characterized by high strength properties, good ductility, resistance to fatigue and impact. Used for heavy-duty parts of engines, devices and machines, used in the production of crankshafts, gears, shafts, piston rods, bolts, heat-treated gears and piston rods.<\/p>\n
\n- Crankshafts.
\n\u2022 Shafts.
\n\u2022 Various gears.
\n\u2022 Fasteners etc<\/li>\n<\/ul>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>All Grades Comparison<\/b><\/strong><\/h2>\n\n\n\nDIN<\/b><\/strong><\/td>\nEN<\/b><\/strong><\/td>\nANFOR<\/b><\/strong><\/td>\nAECMA<\/b><\/strong><\/td>\n<\/tr>\n\n1.5815<\/td>\n 35NiCr6<\/td>\n 35NC6<\/td>\n FE-PL62<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Quality Standard<\/b><\/strong><\/h2>\nEN 10083 Steels for quenching and tempering. Technical delivery conditions for alloy steels
\nEN 10250 Open steel die forgings for general engineering purposes. Alloy special steels<\/p>\n
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Chemical Composition per EN 10083-3<\/b><\/strong><\/h2>\n\n\n\nGRADE<\/b><\/strong><\/td>\nNUMBER<\/b><\/strong><\/td>\nC<\/b><\/strong><\/td>\nSi<\/b><\/strong><\/td>\nMn<\/b><\/strong><\/td>\nP<\/b><\/strong><\/td>\nS<\/b><\/strong><\/td>\nCr<\/b><\/strong><\/td>\nNi<\/b><\/strong><\/td>\n<\/tr>\n\n35NiCr6<\/b><\/strong><\/td>\n1.5815 <\/b><\/strong><\/td>\n0.30-0.37<\/td>\n \u2264 0.40<\/td>\n 0.60-0.90<\/td>\n \u2264 0.025<\/td>\n \u2264 0.025<\/td>\n 0.80-1.10<\/td>\n 1.20-1.60<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mechanical Properties(T=20\u00b0C if not differently stated)<\/b><\/strong><\/h2>\n\n\n\nProcess<\/b><\/strong><\/td>\nDiameter(mm)<\/b><\/strong><\/td>\nTensile Strength Rm (Mpa)<\/b><\/strong><\/td>\nYield Strength Rp0.2 (Mpa)<\/b><\/strong><\/td>\nElongation A5 (%)<\/b><\/strong><\/td>\nArea Reduction Ratio C (%)<\/b><\/strong><\/td>\nImpact Value Kv (J) Room Temperature<\/b><\/strong><\/td>\nHardness (HB)<\/b><\/strong><\/td>\n<\/tr>\n\nSOFT ANNEALED<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n 223 max<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 16 max<\/td>\n 880-1080<\/td>\n 740 min<\/td>\n 12 min<\/td>\n 40 min<\/td>\n \/<\/td>\n 261-318<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 16-40<\/td>\n 880-1080<\/td>\n 740 min<\/td>\n 12 min<\/td>\n 40 min<\/td>\n 35 min<\/td>\n 261-318<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 40-100<\/td>\n 780-980<\/td>\n 640 min<\/td>\n 15 min<\/td>\n 40 min<\/td>\n 35 min<\/td>\n 231-289<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>HEAT TREATMENT:<\/b><\/strong><\/h2>\n\n\n\nProcess<\/b><\/strong><\/td>\nTEMPERATURE \u00b0C<\/b><\/strong><\/td>\nCooling Medium<\/b><\/strong><\/td>\n<\/tr>\n\nHot plastic deformation<\/td>\n 850-1100<\/td>\n \/<\/td>\n<\/tr>\n \nNormalization<\/td>\n 850-880<\/td>\n air<\/td>\n<\/tr>\n \nSoft annealing<\/td>\n 640-690<\/td>\n air<\/td>\n<\/tr>\n \nHardening<\/td>\n 840-860<\/td>\n oil<\/td>\n<\/tr>\n \nTempering<\/td>\n 530-630<\/td>\n air<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mill\u2032s test certificate:<\/b><\/strong><\/h2>\nEN 10204\/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.<\/p>\n<\/div><\/section><\/div>
\n<\/div><\/section>
\nLatest Products<\/h3>
\n\u2022 Shafts.
\n\u2022 Various gears.
\n\u2022 Fasteners etc<\/li>\n<\/ul>\n
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>All Grades Comparison<\/b><\/strong><\/h2>\n\n\n\nDIN<\/b><\/strong><\/td>\nEN<\/b><\/strong><\/td>\nANFOR<\/b><\/strong><\/td>\nAECMA<\/b><\/strong><\/td>\n<\/tr>\n\n1.5815<\/td>\n 35NiCr6<\/td>\n 35NC6<\/td>\n FE-PL62<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Quality Standard<\/b><\/strong><\/h2>\nEN 10083 Steels for quenching and tempering. Technical delivery conditions for alloy steels
\nEN 10250 Open steel die forgings for general engineering purposes. Alloy special steels<\/p>\n
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Chemical Composition per EN 10083-3<\/b><\/strong><\/h2>\n\n\n\nGRADE<\/b><\/strong><\/td>\nNUMBER<\/b><\/strong><\/td>\nC<\/b><\/strong><\/td>\nSi<\/b><\/strong><\/td>\nMn<\/b><\/strong><\/td>\nP<\/b><\/strong><\/td>\nS<\/b><\/strong><\/td>\nCr<\/b><\/strong><\/td>\nNi<\/b><\/strong><\/td>\n<\/tr>\n\n35NiCr6<\/b><\/strong><\/td>\n1.5815 <\/b><\/strong><\/td>\n0.30-0.37<\/td>\n \u2264 0.40<\/td>\n 0.60-0.90<\/td>\n \u2264 0.025<\/td>\n \u2264 0.025<\/td>\n 0.80-1.10<\/td>\n 1.20-1.60<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mechanical Properties(T=20\u00b0C if not differently stated)<\/b><\/strong><\/h2>\n\n\n\nProcess<\/b><\/strong><\/td>\nDiameter(mm)<\/b><\/strong><\/td>\nTensile Strength Rm (Mpa)<\/b><\/strong><\/td>\nYield Strength Rp0.2 (Mpa)<\/b><\/strong><\/td>\nElongation A5 (%)<\/b><\/strong><\/td>\nArea Reduction Ratio C (%)<\/b><\/strong><\/td>\nImpact Value Kv (J) Room Temperature<\/b><\/strong><\/td>\nHardness (HB)<\/b><\/strong><\/td>\n<\/tr>\n\nSOFT ANNEALED<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n 223 max<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 16 max<\/td>\n 880-1080<\/td>\n 740 min<\/td>\n 12 min<\/td>\n 40 min<\/td>\n \/<\/td>\n 261-318<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 16-40<\/td>\n 880-1080<\/td>\n 740 min<\/td>\n 12 min<\/td>\n 40 min<\/td>\n 35 min<\/td>\n 261-318<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 40-100<\/td>\n 780-980<\/td>\n 640 min<\/td>\n 15 min<\/td>\n 40 min<\/td>\n 35 min<\/td>\n 231-289<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>HEAT TREATMENT:<\/b><\/strong><\/h2>\n\n\n\nProcess<\/b><\/strong><\/td>\nTEMPERATURE \u00b0C<\/b><\/strong><\/td>\nCooling Medium<\/b><\/strong><\/td>\n<\/tr>\n\nHot plastic deformation<\/td>\n 850-1100<\/td>\n \/<\/td>\n<\/tr>\n \nNormalization<\/td>\n 850-880<\/td>\n air<\/td>\n<\/tr>\n \nSoft annealing<\/td>\n 640-690<\/td>\n air<\/td>\n<\/tr>\n \nHardening<\/td>\n 840-860<\/td>\n oil<\/td>\n<\/tr>\n \nTempering<\/td>\n 530-630<\/td>\n air<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mill\u2032s test certificate:<\/b><\/strong><\/h2>\nEN 10204\/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.<\/p>\n<\/div><\/section><\/div>
\n<\/div><\/section>
\nLatest Products<\/h3>
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Quality Standard<\/b><\/strong><\/h2>\nEN 10083 Steels for quenching and tempering. Technical delivery conditions for alloy steels
\nEN 10250 Open steel die forgings for general engineering purposes. Alloy special steels<\/p>\n
35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Chemical Composition per EN 10083-3<\/b><\/strong><\/h2>\n\n\n\nGRADE<\/b><\/strong><\/td>\nNUMBER<\/b><\/strong><\/td>\nC<\/b><\/strong><\/td>\nSi<\/b><\/strong><\/td>\nMn<\/b><\/strong><\/td>\nP<\/b><\/strong><\/td>\nS<\/b><\/strong><\/td>\nCr<\/b><\/strong><\/td>\nNi<\/b><\/strong><\/td>\n<\/tr>\n\n35NiCr6<\/b><\/strong><\/td>\n1.5815 <\/b><\/strong><\/td>\n0.30-0.37<\/td>\n \u2264 0.40<\/td>\n 0.60-0.90<\/td>\n \u2264 0.025<\/td>\n \u2264 0.025<\/td>\n 0.80-1.10<\/td>\n 1.20-1.60<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mechanical Properties(T=20\u00b0C if not differently stated)<\/b><\/strong><\/h2>\n\n\n\nProcess<\/b><\/strong><\/td>\nDiameter(mm)<\/b><\/strong><\/td>\nTensile Strength Rm (Mpa)<\/b><\/strong><\/td>\nYield Strength Rp0.2 (Mpa)<\/b><\/strong><\/td>\nElongation A5 (%)<\/b><\/strong><\/td>\nArea Reduction Ratio C (%)<\/b><\/strong><\/td>\nImpact Value Kv (J) Room Temperature<\/b><\/strong><\/td>\nHardness (HB)<\/b><\/strong><\/td>\n<\/tr>\n\nSOFT ANNEALED<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n \/<\/td>\n 223 max<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 16 max<\/td>\n 880-1080<\/td>\n 740 min<\/td>\n 12 min<\/td>\n 40 min<\/td>\n \/<\/td>\n 261-318<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 16-40<\/td>\n 880-1080<\/td>\n 740 min<\/td>\n 12 min<\/td>\n 40 min<\/td>\n 35 min<\/td>\n 261-318<\/td>\n<\/tr>\n \nQUENCHED AND TEMPERED<\/td>\n 40-100<\/td>\n 780-980<\/td>\n 640 min<\/td>\n 15 min<\/td>\n 40 min<\/td>\n 35 min<\/td>\n 231-289<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>HEAT TREATMENT:<\/b><\/strong><\/h2>\n\n\n\nProcess<\/b><\/strong><\/td>\nTEMPERATURE \u00b0C<\/b><\/strong><\/td>\nCooling Medium<\/b><\/strong><\/td>\n<\/tr>\n\nHot plastic deformation<\/td>\n 850-1100<\/td>\n \/<\/td>\n<\/tr>\n \nNormalization<\/td>\n 850-880<\/td>\n air<\/td>\n<\/tr>\n \nSoft annealing<\/td>\n 640-690<\/td>\n air<\/td>\n<\/tr>\n \nHardening<\/td>\n 840-860<\/td>\n oil<\/td>\n<\/tr>\n \nTempering<\/td>\n 530-630<\/td>\n air<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mill\u2032s test certificate:<\/b><\/strong><\/h2>\nEN 10204\/3.1 with all relevant data reg. chem. composition, mech. properties and results of testing.<\/p>\n<\/div><\/section><\/div>
\n<\/div><\/section>
\nLatest Products<\/h3>
\nEN 10250 Open steel die forgings for general engineering purposes. Alloy special steels<\/p>\n
GRADE<\/b><\/strong><\/td>\n| NUMBER<\/b><\/strong><\/td>\n | C<\/b><\/strong><\/td>\n | Si<\/b><\/strong><\/td>\n | Mn<\/b><\/strong><\/td>\n | P<\/b><\/strong><\/td>\n | S<\/b><\/strong><\/td>\n | Cr<\/b><\/strong><\/td>\n | Ni<\/b><\/strong><\/td>\n<\/tr>\n | 35NiCr6<\/b><\/strong><\/td>\n | 1.5815 <\/b><\/strong><\/td>\n | 0.30-0.37<\/td>\n | \u2264 0.40<\/td>\n | 0.60-0.90<\/td>\n | \u2264 0.025<\/td>\n | \u2264 0.025<\/td>\n | 0.80-1.10<\/td>\n | 1.20-1.60<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n | 35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mechanical Properties(T=20\u00b0C if not differently stated)<\/b><\/strong><\/h2>\nProcess<\/b><\/strong><\/td>\n | Diameter(mm)<\/b><\/strong><\/td>\n | Tensile Strength Rm (Mpa)<\/b><\/strong><\/td>\n | Yield Strength Rp0.2 (Mpa)<\/b><\/strong><\/td>\n | Elongation A5 (%)<\/b><\/strong><\/td>\n | Area Reduction Ratio C (%)<\/b><\/strong><\/td>\n | Impact Value Kv (J) Room Temperature<\/b><\/strong><\/td>\n | Hardness (HB)<\/b><\/strong><\/td>\n<\/tr>\n | SOFT ANNEALED<\/td>\n | \/<\/td>\n | \/<\/td>\n | \/<\/td>\n | \/<\/td>\n | \/<\/td>\n | \/<\/td>\n | 223 max<\/td>\n<\/tr>\n | QUENCHED AND TEMPERED<\/td>\n | 16 max<\/td>\n | 880-1080<\/td>\n | 740 min<\/td>\n | 12 min<\/td>\n | 40 min<\/td>\n | \/<\/td>\n | 261-318<\/td>\n<\/tr>\n | QUENCHED AND TEMPERED<\/td>\n | 16-40<\/td>\n | 880-1080<\/td>\n | 740 min<\/td>\n | 12 min<\/td>\n | 40 min<\/td>\n | 35 min<\/td>\n | 261-318<\/td>\n<\/tr>\n | QUENCHED AND TEMPERED<\/td>\n | 40-100<\/td>\n | 780-980<\/td>\n | 640 min<\/td>\n | 15 min<\/td>\n | 40 min<\/td>\n | 35 min<\/td>\n | 231-289<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n | 35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>HEAT TREATMENT:<\/b><\/strong><\/h2>\nProcess<\/b><\/strong><\/td>\n | TEMPERATURE \u00b0C<\/b><\/strong><\/td>\n | Cooling Medium<\/b><\/strong><\/td>\n<\/tr>\n | Hot plastic deformation<\/td>\n | 850-1100<\/td>\n | \/<\/td>\n<\/tr>\n | Normalization<\/td>\n | 850-880<\/td>\n | air<\/td>\n<\/tr>\n | Soft annealing<\/td>\n | 640-690<\/td>\n | air<\/td>\n<\/tr>\n | Hardening<\/td>\n | 840-860<\/td>\n | oil<\/td>\n<\/tr>\n | Tempering<\/td>\n | 530-630<\/td>\n | air<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n | 35NiCr6 \/ 1.5815 Steel<\/b><\/strong>\u00a0<\/b><\/strong>Mill\u2032s test certificate:<\/b><\/strong><\/h2>\n |
\nLatest Products<\/h3>
![\"1.2358\"](\"https:\/\/waldunsteel.com\/wp-content\/uploads\/2024\/01\/1.2358-36x36.jpg\")
<\/a>![\"sae](\"https:\/\/waldunsteel.com\/wp-content\/uploads\/2021\/04\/SAE-1045-Carbon-Steel-Round-Bars-36x36.jpg\")
<\/a>![\"Steel-C60r-1-1223-Bar-or-Rod-for-Project\"](\"https:\/\/waldunsteel.com\/wp-content\/uploads\/2021\/08\/Steel-C60r-1-1223-Bar-or-Rod-for-Project-36x36.jpg\")
<\/a>![\"waldun](\"https:\/\/waldunsteel.com\/wp-content\/uploads\/2022\/05\/Waldun-Steel-ISO-9001-Logo-300x158-1.png\"){kind=logo}